Featured Content

ISO Loader pentru 6.20 TN-A Released

0 comentarii



Download: >>> AICI <<<
Instalare

     Creaţi un folder numit ISO în rădăcina cardului vostru sau în rădăcina memoriei PSP Go. Apoi puneţi toate fişierele din arhiva de mai sus în x:/PSP/GAME/.
     În folderul ISO se vor pune toate jocurile [ legal copiate :D, repet legal copiate de pe torrenti :))))) ].

     Porniţi HEN-ul şi spor la jucat !!!

[FAQ] Total_Noob's HEN

0 comentarii
The following is a list of commonly asked questions regarding Total_Noob's HEN for firmware versions 6.20, 6.30, 6.31, 6.35, and any other firmware he may develop this for. Hopefully this will help clear up any questions people may have.

What is a HEN?
A HEN is a Homebrew Enabler. This means you can launch homebrew directly from the XMB without using a Loader (such has HBL). It is not a CFW so it usually can't launch ISOs unless there is an ISO Loader homebrew.

When will it be released?
Hen is available HERE

Will it be released for 6.30, 6.31, or 6.35?
Yes, eventually. We do not have a release date for these firmwares. We aren't psychic and can't see the future.

Should I upgrade from 5.03 GEN-C to use this?
I would suggest waiting until there is an ISO loader at least. Personally, I would wait until it had support for custom themes and plugins.

Should I upgrade from 5.00 M33 or 5.50 GEN to use this?
Why would you want to? This is made for people with the unhackable PSPs. Unless a permanent custom firmware is created for 6.20, I would NOT upgrade.
I already upgraded, is it possible to downgrade back to 5.03??
Total_Noob said he was going to make a "downgrade homebrew" but I do not know if that is only for the hackable PSPs or if all PSPs can do it. It's also possible to use Hellcat's Recovery Flasher to downgrade the older PSPs, however it would brick a newer PSP 2000, 3000 or a Go. Do not attempt any downgrade unless you know what you are doing 100%.

Will this let me play ISO, CSO, or PSX games?
Total_Noob will not be adding an ISO loader to this but there are several teams already working on an ISO Loader which will probably be available soon after the HEN is released. As for PSX games... that depends on if the popsloader plugin works on HEN, I guess.

If that doesn’t run isos, what’s the difference between TN Hen and a homebrew loader such as Half Byte Loader?

Originally Posted by wololo
A Hen uses a kernel exploit, and gives users full control of the PSP. This means more homebrew compatibility than with HBL. For example homebrews that require kernel access will most likely work with the HEN. This also means that the Hen opens the door to iso loading, plugins support, etc… through a LCFW (Live/Light Custom FirmWare)


So, what’s the difference between a Hen and a CFW?

Originally Posted by wololo
That’s a complex question, because the definition of CFW is vague. Because of that, I decided to create the term “LCFW” for “Live Custom Firmware” (in reference to the Linux “Live CD” distributions) or “Light Custom Firmware”, per opposition to the historical “CFW” from the psp1000/psp2000 era.


Well, ok, so what are the differences between a Hen, a CFW, and a LCFW?
Originally Posted by wololo
I’ll try to make this short:

A CFW (custom firmware) is a bunch of hacks that enable iso loading, plugin support, recovery menu, etc… on old models of PSPs. The most famous work on CFW was performed by Dark_Alex. a CFW gets installed in the flash of the PSP, and overrides the Official firmware at startup. Technically, for the end user, it means that if you turn off your psp, then turn it on again, you still have the CFW. Custom Firmwares are not possible anymore on modern PSPs, as Sony patched a critical hardware bug that made CFW possible. The first motherboards to have this patch are the infamous “ta88v3″ released in summer 2008. Basically no PSP bought new after this period can get a CFW.
    A LCFW (Live/Light Custom firmware) is the same thing as a CFW (actually, the LCFW we currently know about are mostly made of reverse engineered files from earlier CFWs), except it patches the Ram after the PSP is turned on (LCFW are usually kernel mode homebrews, so they require a kernel hack, which is what the Hen provides, see below). While the CFW patches the PSP firmware at boot time, for LCFW you need to patch the Ram after the Firmware is booted. From the end user’s point of view, this means that if you turn your PSP off, you will need to run the LCFW again (and, of course, the Hen before that) in order to activate it. Keep in mind that putting your PSP in “sleep” mode is not equivalent to turning it off. If you put your psp in sleep mode, the LCFW stays in Ram
    A Hen, as we said earlier, is a kernel exploit + a few patches that allows to run unsigned software, including ones that have access to kernel. It is a necessary tool to install and run a LCFW.

So Summary: CFW can not exist anymore in the current state of our knowledge, and is replaced by Hen+LCFW, which are a combination of a kernel exploit and some patches in the Ram to allow a “CFW-like” experience.


No one wants a HEN! Make a custom firmware already!
Make one yourself. You'll find that it's a lot harder than you think, so don't demand this.

Sursa: forums.psp-hacks

[Stire]Pana la 64GB pe PSP prin convertorul microSD-Memory Stick Pro DUO

0 comentarii

CR-5400 for the Sony PSP




    Exact cand credeam ca Sony PSP poate functiona doar cu carduri Memory Stick Pro DUO, soseste convertorul CR-5400, care transforma un card microSD/microSDHC intr-unul compatibil PSP.
Astfel, veti dispune de 16GB de memorie pe celebra consola Sony, sau chiar 32GB, daca folositi 4 carduri microSDHC.
   La ora actuala producatorul acestui foarte util accesoriu incearca sa gaseasca o metoda pentru ca PSP-ul sa suporte destule carduri microSD/microSDHC incat sa dispuna de o memorie de 64GB, mai mult chiar decat un Asus Eee PC.



    Just when you thought that the Sony PSP could function with just Memory Stick Pro DUOs, along comes the CR-5400 that converts a microSD/microSDHC memory card into a Memory Stick Pro DUO, allowing you to tote up to 16GB of data on it. For those who prefer double the amount, why not pick up the CR-3100 that is able to combine up to a quartet of such microSDHC cards, bringing the total to a whopping 32GB! Currently, the manufacturer is looking to hit a maximum storage of 64GB – guess the PSP can hold even more information than an Asus Eee PC eh!

Sursa: ubergizmo.com

[3000 4g CRASH] 6.20 TN-A/PSP-3000 Patch: O soluţie temporară care rezolvă crash-urile.

0 comentarii


   În atenţia userilor care au probleme cu crash-urile pe modelele 3000 folosind patch-ul neoficial a lui Vflame. Câteva comentarii au indicat faptul că următoarea mişcare va pune capăt acelor crash-uri. Ţineţi minte că acest lucru nu este ceva permanent, trebuie să repetaţi paşii la fiecare homebrew care îl veţi rula, cel puţin până când apare 6.20 TN-B:

1. Porniţi HEN-ul normal (cu HBL+Patapon 2 Demo)
2. Când reveniţi în XMB scoateţi cardul din PSP.
3. Apăsaţi SELECT ca să porniţi VSH menu.
4. Selectaţi “RESTART VSH”.
5. Reintroduce-ţi cardul după ce aţi terminat cu restartul şi încercaţi acum orice homebrew. Ar trebui să pornească fără crash.
6. Repetaţi paşii 2-5 de fiecare dată când porniţi un homebrew.

English

1. open patapon and load hen, which will reset your psp.
2. check HEN is enabled by pressing select and you should see the vsh menu.
3. remove your mem card.
4. press select u see the vsh menu and choose restart vsh menu
5. after psp ram restarts, insert your mem card then go to ur homebrew and click on it and everything should load and it doesent crash and so far works perfectly !!
6. follow steps 3 & 4 evertime u start a new homebrew.
I hope it works with you =]


"Cu toate că TN (Total_Noob) este foarte ocupat zilele acestea, el a declarat pe PSPKing.de că PSP-urile 3000 4g (care până acum rulau update-ul neoficial Vflame) vor primi un 6.20 TN-B (HEN). Asta deoarece versiunea neoficială avea multe crash-uri şi bug-uri."

Multumesc: Kizko, psp-fanatik

[UPDATE] 6.20 TN (HEN) – Modează-ţi PSP-ul acum! PSP 3000 / PSP GO

5 comentarii
    

CUVINTELE SUBLINIATE CONTIN LINKURI DE DOWNLOAD A PROGRAMELOR NECESARE PENTRU MODARE!

Total_Noob s-a tinut de cuvant si ne-a oferit un cadou frumos.
Noual HEN pentru firmware 6.20 este aici.

Necesar:
Instructiuni:

1. Descarcati fisierele necesare. (puteti folosii acest pachet> Download> link1 > link2 )
2. Puneti fisierul EBOOT.PBP din arhiva lui TN in /HBL/menu
3. Porniti Patapon 2 Demo
4. Incarcati salvarea modificata
5. Porniti HBL si apoi HEN-ul se va instala automat.
6. Dupa ce s-a restartat psp-ul din modul de joc apasati SELECT si dezactivati VSH meniul.
7. Rulati Prometheus Iso Loader si apasati X pe jocul dorit din lista.
8. Enjoy!


(English version)
1. extract the files
2. plug your psp in usb to the computer
3. drag the HBL folder and h.bin the root of your memory stick
4. copy or drag the psp folder
5. launch the patapon 2 exploit and load the game
6. press X to the HEN
7. after you go back to the psp menu press select go to restart vsh but first unplug your memory stick after you unplugged the memory stick press restart vsh when it turns back on plug the memory stick back
8. for the iso files in the root of the memory stick create a folder and name the folder ISO and drag the files to the ISO folder
9. run Iso loader and press X to the iso

10. Enjoy!

Download> link1 > link2 (my link)




UPDATE1
Se pare ca unii oameni cu PSP-300X au probleme cu acest HEN asa ca deja s-a scos un update neoficial. Pentru update pur si simplu inlocuiti vechiul EBOOT.PBP cu noul EBOOT.PBP

Download: http://filezone.ro/files/155221_yzf07/UO_TN_HEN_A_vflame.zip

Iar pentru utilizatorii de PSP go carora nu le porneste HEN-ul. S-a gasit un fix. In folderul de la HBL deschideti hbl_config.txt si stergeti "#" din fata liniei override_sceIoMkdir=-1.

UPDATE2
Am mai invatat o chestie astazi. Se pare ca pentru utilizatorii de PSP go ca sa pota rula plugin-uri in vsh.txt, game.txt si pops.txt in loc de ms0: trebuie sa scrie ef0:. Se pare ca ef0: este radacina memorie interne a go-ului.

UPDATE3
Câteva rezolvări pentru cei care întâmpină un crash:
1. Faceţi un Backup în PC la fişierele ce vă mai trebuiesc de pe memory stick-ul dvs. Formataţi-l din PSP. Începeţi instalarea HEN-ului pe stick-ul nou formatat.
2. Puteţi să vă jucaţi în hbl/hbl_config.txt. Încercaţi să schimbaţi diferite overrides sau alte opţiuni configurabile (nu recomand începătorilor, pe propriul risc).
3. Ştergeţi tot ce aveţi în ms0:/seplugins. Unele pluginuri nu sunt compativile cu 6.20 TN-A.
4. Dezactivaţi vMenu (VisualMenu) dacă îl folosiţi.
5. Urmăriţi topicurile de pe forum. Nu sunteţi singurii care întâmpinaţi probleme. Reţineţi că e un update instabil:


UPDATE 
Prometheus Iso Loader
Si dupa cum ne asteptam a aparut si mult doritul ISO Loader pt HEN-ul lui TN.

Necesar:
Instructiuni:

1. Dezarhivati continutul arhivei in /PSP/GAME
2. Faceti un folder ISO in radacina memory stick-ului sau a memorie interne (in cazul go-ului)
3. Copiati backup-urile jocurilor in folderul ISO
4. Porniti ISO Loader-ul prin internediul HEN-ului si apoi porniti jocul.

OBS: Pentru cei care vor sa foloseasca M33 Driver am dump-at eu isofs_500.prx din ofw 5.00 si l-am adaugat ca attachment la post. Ca sa il instalati pur si simplu il copiati in folderul ISO Loader-ului.


Half-Byte Loader R109 şi wMenu 0.3 HBL rev 109 şi wMenu 0.3
Ultima versiune stabilă. Rapidă şi sigură, aceasta este versiunea în prezent recomandată.

 

Cum să instalaţi şi folosiţi HBL:

1. Conectaţi PSP-ul la PC prin cablu
2. Copiaţi folderul "UCUS98734" (Patapon 2 Demo) în ms0:/PSP/GAME
3. Copiaţi folderul “hbl” si fisierul “h.bin” (HBL rev 109) în ms0: (le copiaţi pe root)
4. Copiaţi folderul "UCUS98732_DATA02" (Salvarea Patapon 2) în ms0:/PSP/SAVEDATA
5. Copiaţi orice homebrew vreti sa rulaţi în ms0:/PSP/GAME
6. Porniţi demo-ul, încărcaţi salvarea, după care porniţi orice program doriţi.

Download:

Pataon 2 Demo îl luaţi de aici Patapon 2 Demo

HBL rev 109 + Salvarea Patapon 2 Exploit.

HBL rev 109
Salvarea Patapon 2


Acest HBL merge pe PSP 1k/2k/3k inclusiv Go-ul.

Atenţie: Exploit-ul merge doar de la 5.03 până la 6.20, deci nu va merge pe 6.30 sau 6.31

Nota: Acest exploit rulează doar Homebrews, Emulatoare, Jocuri nu cele (ISO/CSO sau PSX) pentru a rula iso-uri si cso-uri folositi Prometheus Iso Loader!


MULTUMIRI:  psp-fanatik, Wololo, Adr!an, Kizko, Total_Noob, pspmoder

Instalare Prometheus-4 pe un PSP cu Version. 5.03 [TA088v3]

2 comentarii
    NU DATI BANI CELOR CARE VOR SA VA FRAIEREASCA SPUNAND CA VA POATE MODA PSP-UL! NU ESTE ADEVARAT, MODAREA ESTE PROVIZORIE SI O POTI FACE CHIAR TU !!!

Cum se instaleaza?

ATENTIE!
Puteti instala acest soft numai daca versiunea de firmware oficial de pe psp este 5.03!
!Daca este mai mare nu merge!

1a. instalati frimware-ul oficial scos de sony (ATENTIE! Numai daca versiune
de firmware care este instalata pe psp este mai mica de 5.03, intrati la
"settings>system settings>system information" pe psp, pentru a verifica, trebuie sa scrie version 5.03)
Daca este 5.03 sariti de pasul 1a si treceti direct la pasul 1b;

COPIATI FISIERELE PE CARE LE-AM PUS LA DOWNLOAD MAI JOS APOI URMATI PASII:

1b. Copiati folderul ChickHEN din SLIM in ms0:/PSP/GAME/
      Copiati folderul GEN-C in ms0:/PSP/GAME/
      Copiati folderul 5.03_Prometheus in ms0:/PSP/GAME/
      Deschideti PSP-ul intrati in "Games" si urmati pasii urmatori:


1c.Instalati ChickHEN (sau MHUSpeed);
5.03 ChickHEN Enabler Revision 2


  Intrati in Foto pe PSP si deschideti folderul ChickHen, ecranul PSP-ului trebuie sa se faca verde apoi trebuie sa se restarteze
daca nu se intampla asta si se inchide deschideti-l si incercati din nou pana se face verde ecranul si se va restarta.

  SAU

MHUSPEED v3 - Alternativa ChickHEN


2. Instalati Custom Firmware 5.03 GEN-C;
CFW 5.03GEN-C pentru HEN



3.Instalati CFW 5.03 Prometheus pentru PSP-2000 TA088v3 & PSP-3000;


4. Intrati pe psp in "settings>system settings>system information", si vedeti daca scrie 5.03 Prome-3,
daca da, inseamna ca s-a modat.

ATENTIE!
Tineti PSP-ul in stand by pentru a pastra modarea altfel trebuie urmati pasii de
fiecare data cand deschideti PSP-ul.

DOWNLOAD --> necesare pentru modare!


http://filezone.ro/files/155214_dvyup/1a%20Official%20503.rar
1a Official 503.rar

http://filezone.ro/files/155215_scgjs/1b%20CHickHEN%20Enabler%20Revision%202%20pentru%20Firmware%205.03.rar
1b CHickHEN Enabler Revision 2 pentru Firmware 5.03.rar


http://filezone.ro/files/155216_zwmiz/1c%20MHUSPEED%20v3%20-%20Alternativ%C4%83%20ChickHEN.rar
1c MHUSPEED v3 - Alternativă ChickHEN.rar


http://filezone.ro/files/155217_rrrde/2%20Custom%20Firmware%205.03%20GEN-C%20Final%20pentru%20HEN.zip
2 Custom Firmware 5.03 GEN-C Final pentru HEN.zip

http://filezone.ro/files/155218_bu7s3/3a%20Custom%20Firmware%205%2003%20Prometheus-3%20v2%20pentru%20PSP-2000%20TA088v3%20%26%20PSP-3000.rar
3a Custom Firmware 5 03 Prometheus-3 v2 pentru PSP-2000 TA088v3 & PSP-3000.rar

http://filezone.ro/files/155219_sblou/3b%20Prometheus-4%20for%205.03%20GEN-C.rar
3b Prometheus-4 for 5.03 GEN-C.rar

How to Install Custom Firmware 5.03 GEN-C for ChickHEN

0 comentarii
Requirements:
  • A PSP-3000 or PSP-2000 with TA-088v3 motherboard.
  • A PSP with ChickHen R2 up and running
  • Download: 5.03 GEN-C
  • Back up your save files (so that if they get corrupted, you still have backups)

How to Install Custom Firmware 5.03 GEN-C for ChickHEN


ChickHen R2Before you proceed to installing custom firmware 5.03 GEN-C, you need to install ChickHen R2 on your PSP first. Just click the picture on the right to install ChickHen R2 and comeback here to finish the installation.

How to Install 5.03 GEN-C

  • Make sure your PSP has ChickHen R2 installed. You won’t be able to install 5.03 GEN-C without it.
  • Extract the 5.03 GEN-C files to your computer.
  • Copy the PSP folder to your PSP’s memory stick. (Yes, just drag the whole folder there)
  • Disconnect the PSP from USB
  • Run 5.03 GEN-C Updater from under Game on your PSP’s XMB
  • After all process is complete, press X. Your PSP will reboot.
  • Congratulations, you’ve just installed 5.03 GEN-C.
Important Note: If this is NOT the first time that you’ll be install 5.03 GEN-C (meaning you accidentally turned off your PSP and had to reload 5.03 GEN-C again), hold the L trigger (Left shoulder button) when running the updater.

IMPORTANT NOTES:

  • Compatible with the PSP-3000 and PSP-2000 v3 official firmware 5.03
  • Play backups of games that REQUIRE PSP firmware 6.10 and above
  • Reading UMD that that REQUIRE PSP firmware 6.10 and above
  • Reading UMD / ISO games protected against the custom firmware. Playing UMD / ISO games protected against the custom firmware.
  • Play PS1 games
  • GEN VSH MENU available (SELECT)
  • Recovery in VSH Recovery available in VSH available
  • Reading Reading Homebrews
KNOWN BUGS:
  • VSH menu is mixed up

Troubleshooting:

If you experience problems like non-working games, or games that give the error “game could not be started” try the following:
Make sure your UMD mode is set to M33 driver
  • On your XMB, press select, to access the VSH menu
  • Select M33 driver for the UMD mode option as shown below:
Disable options

[COOL] PSP Mod

1 comentarii
Modeaza PSP-ul si Hardware nu numai Software intr-un mod cat mai original! Afla acum cum poti face asta...>


Custom Firmware 5.50GEN-D3 Final Released

0 comentarii

5-03gen-d3

As we all know, yesterday's release of Custom Firmware 5.50GEN-D3 didn't really went well as planned with some users reporting various problems using the firmware update. So what's the reasons behind the hiccups and what's new with the latest release?

As posted by voxuni over at PSPGEN (translated):

A little less than 24 hours after our previous release, here is the Custom Firmware 5.50 GEN-D3 fully functional, we will try to respond quickly to the question everyone asks:

But what happened anyway?

As you all noticed last night the server was "slightly" faltered under the weight of multiple connections, and F5 desperate that most of us were abused, awaiting the arrival of new custom firmware.
The editor allows us to create and publish our news has also been affected, and if we could publish, not without difficulty, the 5.03GEN-C, things are complicated when it came time to finalize the news on the 5.50GEN-D3. When we finally had the opportunity to access the editor, is a beta version already on our servers which has unfortunately been put online.

The version presented this morning in the emergency encountered numerous problems for some owners of PSP Slim. In fact, a bug prevented in the VSH to see the ISO files from the Memory Stick. This bug was not found on our PSP, Yoshihiro was soon given the job based on the feedback you've provided in the pages of our forums.

We apologize for the inconvenience, and we invite you to take advantage of this revised version. You can reinstall it safely over your version 5.50GEN-D3 current.

5.03GEN-D3 - 2

Improvements in the final version:

* Fix for bug eliminate the VSH menu, everyone can now enjoy the contents of its Memory Stick
* Update on backups that were seen as corrupt.
* Improved speed of access to Memory Stick during a game session
* Added support for IRSHELL D3 which will release shortly.

Only God Eater worries arise again, but we can hope that this update should address everyone. During this long day, we noticed that a lot of problems stem from improper installation, and we invite you to read the next page... Via [PSPGEN]


Download: Custom Firmware 5.50GEN-D3 final

LINK2: http://dl.qj.net/down/custom-firmware-550gend3-final.html

LINK3: http://www.girlshare.ro/800974.9


Credite: GENyus


[NEW] Custom Firmware Releases

1 comentarii
As other threads are about one custom firmware for the PSP released. I decided to make a thread for most of them ALL into one thread.

Due to Exophase Downloads being launched, this thread will no longer be updated; now it will be reserved for the older Custom Firmware Versions.

In order to run these M33 Releases/Updates, you must have any (Phat or Slim) PSP with Custom Firmware already installed.

In order to run GEN Releases/Updates, you must have a PSP running 3.52 M33-3 or higher.

If you have Official Firmware, please do not ask if these updates/installers work, because they don't. They will be corrupted data or you will get an error like 8100248. Also, if you have a PSP Slim with a TA-088 V3 motherboard and/or PSP-3000, the custom firmware installers/updates will not work, and if they do, they will BRICK your PSP-3000 or [TA-088 V3] PSP Slim. (TA-088 V3 models come with firmware Version 4.00 or higher. The PSP-3000 comes with firmware 4.20 and higher.)



Installation Instructions:

(These instructions apply only to the M33 updaters of 3.80 M33 and higher. For other custom firmware installers, follow directions of the README.txt and/or the on-screen instructions.)

1.Unzip/Un-rar the #.## M33-# file and put the EBOOT.PBP into X:/PSP/GAME/UPDATE (X is the root of the MemoryStick)

2. Put the ###.PBP also into X:/PSP/GAME/UPDATE folder.

3. Start update from XMB.

---------------------------------------------------------------------------------------------------
If anyone wants Official Update EBOOTs, go here

Latest CFW:

5.00 M33-6 is the latest CFW.

Latest M33 Releases
---------------------------------------------------------------------------------------------------
5.00 M33-6

Download 5.00 M33-6 /Download 500.PBP

*500.PBP is not nessecary if you are updating from 5.00 M33/M33-2/M33-3/M33-4/M33-5.
--------------------------------------------------------------------------------------
Recent M33 Releases

5.00 M33-4

Download 5.00 M33-4
/Download 500.PBP

*5.00 M33-4 is a very excellent custom firmware, and regardless of 5.00 M33-6, it will remain as an available download.

4.01 M33-2.

Download 4.01 M33-2 /Download 401.PBP

3.90 M33-3
Download 3.90 M33-3 /Download 390.PBP

3.80 M33-5

Download 3.80 M33-5 /Download 380.PBP

3.71 M33-4 (Requires 3.71 M33-3 or lower 3.71 M33 versions.)

Download 3.71 M33-4 Update

3.71 M33 Download 3.71 M33 /Download 371.PBP

3.60 M33 (PSP Slim only and for PSPs running 3.60 Official) *Requires a Pandora Battery and MagicMemoryStick.

Download 3.60 M33 / Install Guide

-----------------------------------------------------------------------------------------------

Other Recent Custom Firmware

5.02 GEN-A: Download Custom Firmware 5.02 GEN-A

5.02 OME: Download 5.02 OME *This is ISO/CSO enabled custom firmware.

CFW 5.02: Download CFW 5.02 *ISO/CSO cannot run on this custom firmware.

4.05 TDP-2: (Not a CFW, is a patch.) Download 4.05 TDP-2

3.95 GEN-2: Download 3.95 GEN-2 /Download 395.PBP

3.95 GEN: Download 3.95 GEN; Warning: May contain bugs, use 3.95 GEN-2 instead.

3.73 HX-1: Download 3.73 HX-1

3.72 HX-2: Download 3.72 HX-2

3.72 HX-1: Download 3.72 HX-1

3.40 LE* V3: Download 3.40 LE V3

3.40 LE*: Download 3.40 LE V1


---------------------------------------------------------------------------------------------
PSP-1000 "PSP Phat" M33 Releases

3.52 M33 Custom Firmware+Updates:

3.52 M33-4: Download 3.52-M33-4

3.52 M33-3: Download 3.52 M33-3 ; Warning: may contain bugs. It is recommended to update to 3.52 M33-4

3.52 M33-2: Download 3.52 M33-2 ; Warning: may contain bugs. It is recommended to update to 3.52 M33-4

3.52 M33: Download 3.52 M33


3.51 M33 Custom Firmware+Updates

Download 3.51 M33-7

3.51 M33 WLAN Bug Fix

3.51 M33 Release / Install Guide

*For 3.51 M33, everything was fixed in 3.51 M33-7. If anyone has 3.51 M33, they can just update to 3.51 M33-7 and skip the other updates such as M33-2 all the way to M33-6.
--------------------------------------------------------------------------------------------------
PSP-1000 "OE" Custom Firmwares

3.40 OE-A

Download 3.40 OE-A / Install Guide

3.30 OE

Download 3.30 OE-A2

Download 3.30 OE-A

3.10 OE

Download 3.10 OE-A2

Download 3.10 OE-A

3.03 OE

Download 3.03 OE-C

Download 3.03 OE

3.02 OE

Download 3.02 OE-B

Download 3.02 OE

Credite: jx233, exophase.com

Cum sa iti faci teme pentru PSP?

0 comentarii
Cum sa iti faci teme pentru PSP?Voi posta aici un tutorial relativ simplu , iar temele rezultate vor fi in format *.ptf.Acestea vor fi rulate direct de pe PSP (fara programe ca cxmb) , iar de asemenea riscul de brick este de 0%.

Avem nevoie de :
-custom_psp_theme_creator http://www.fileshare.ro/1052115604.8
-un convertor de imagini (pentru a converti imagini in TGA/PNG)

A).Crearea temei
Prima data trebuie sa creem tema.
Descarcam custom_psp_theme_creator , dezarhivam cu arhivatorul preferat si rulam programul.
Vedem ca avem mai multe categorii :Information , Wallpaper , Category Icons , First Level Icons , Second Level Icons si Others.

Vom folosi convertorul de imagini , pentru a converti wallpaper-ul si iconitele in dimeniunile : 480*272 pentru wallpaper si 64*48 pentru iconite.Extensiile sunt urmoarele : BMP pentru wallpaper si TGA/PNG pentru iconite.

1.Incepem cu Information , unde completam cele 3 casute cum urmeaza : Title (numele temei) , Product ID (scriem orice) si version (versiunea temei -> 1.0).
2.Dam click pe Wallpaper.Aici va trebui sa inseram o imagine in format BMP si de rezolutie 480*272 , care va fi wallpaper-ul temei (imaginea de fundal).Dam click pe butonul "folder" si selectam wallpaper-ul.
3.Mergem la urmatoarea categorie , anume Category Icons.Aici sunt iconitele categoriilor (Settings , Photos , Music , Video , Game , Network , TV).Fiecarei categorii putem schimba iconita , sau o putem lasa pe cea default.Daca vrem sa schimbam iconitele va trebui sa creem propriile noaste iconite cu Paint (sau cu ceva de creat imagini) si sa le atasam temei.Cand avem iconitele create , dam click pe butonul "folder" pentru a selecta iconita fiecare categorii.
4.Navigam catre urmatoarea categorie , First Level Icons.Aici sunt iconitele secundare , cele de sub categoriile generale.Facem exact ca si la pasul 3 (creem iconitele si le atasam).
5.Megem la Second Level Icons.Aici sunt iconitele secundare (cele de sub iconitele primare).Facem exact ca la pasul 3 sau pasul 4.
6.Categoria Others e pentru a vizualiza iconit sau wallpaper inaitne de a le atasa in tema (pentru a le testa).In caz ca nu avem wallpaper , putem sa setam culoarea temei la Theme Color.
7.Pentru a transforma ce am facut pana acum in format *.ptf (pentru PSP) , trebuie sa dam click pe meniul File -> si alegem Export.Dam un nume temei (ex : PSP-Fanatik) , navigam unde vren s-o salvam si dam click pe Save.

B)Instalarea temei pe PSP
Dupa ce am creat tema , trebuie sa o "instalam" pe PSP pentru a o putea folosi.
1.Conectam PSP-ul la PC prin cablu USB.
2.Copiem tema facuta anterior in X:/PSP/THEMES (unde X este litera drive-ului PSP-ului).

C)Utilizarea temei
Pentru a utiliza tema , mergem la categoria Settins -> Theme Settings si selectam tema.

Mentionez ca programul Custom PSP Theme Creator nu este facut de mine , ci de firma Sony.

Enjoy , sper sa va ajute.
Bafta , crsiti_mic.

Autor original:cristi_mic

[HOMEBREW] PSPDictionary v2.0.0 (Translator)

0 comentarii
PSPDictionary v2.0.0
- este mai mult un translator decat un dictionar
- scrierea cuvintelor se face prin analog pad si /\, [], X, O
- se poate conecta la internet pentru rezultate mai multe
- limbi suportate: Engleza, Germana, Franceza, Spaniola, Italiana
- pentru a folosi programul in modul online apasati R, iar pentru a reveni la modul off-line apasati L.
- merge pe PSP SLIM si PSP FAT
- testat pe PSP SLIM 5.00m33-6

Instalare: dupa dezarhivare se copiaza folder-ul "python" in ROOT-ul cardului, iar folder-ul "PSPDictionary" se copiaza in mso:/PSP/GAME.

Download







Cea mai noua versiune a PSPDictionary
PSPDictionary v2.1.0

- scrierea cuvintelor se face prin analog pad si /\, [], X, O
- se poate conecta la internet pentru rezultate mai multe
- limbi suportate: Engleza, Germana, Franceza, Spaniola, Italiana
- pentru a folosi programul in modul online apasati R, iar pentru a reveni la modul off-line apasati L.
- merge pe PSP SLIM si PSP FAT
- testat pe PSP SLIM 5.00m33-6

Changelog: v2.1.0
- Improved the online translations. Now, to translate (online) a word you must first indicate the fists language and then the language of the translation.
Moreover, the online translation is most fast
- Solved a bug in the chronology

Instalare: dupa dezarhivare se copiaza folder-ul "python" in ROOT-ul cardului, iar folder-ul "PSPDictionary" se copiaza in mso:/PSP/GAME.

Download



Credite: psp-fanatik & ©teh_1

[HOMEBREW-PlayerMP3] LightMP3 Version 2.0.0 RC3

0 comentarii
LightMP3 Version 2.0.0 RC3



Descriere

LightMP3:

- este un music player care suporta MP3/OGG Vorbis/FLAC/Atrac3+
- este facut sa consume cat mai putin din baterie
- cu bateria incarcata 100% si cu lumina de la display la minim poate reda pana la 9 ore de muzica
- cu batria incarcata 100% si cu display-ul oprit (apasati START in timpul redarii unui cantec) poate reda pana la 11 ore de muzica.


FEATURES
--------
-Skinnable and multilanguage (english, italian, portuguese, french, polish, dutch)
-Support for kernel 3.x and Slim&Light
-Support for MP3, OGG Vorbis, ATRAC3+ (*.aa3, *.omg, *.oma), FLAC
-File browser
-Support for m3u playlist
-Playlist Editor
-Retrieve track's information from ID3v1/ID3v2 or Vorbis Comments
-Coverart retrieved from ID3v2 (only MP3) [image formats: jpeg, png]
-Works with remote controller
-Playing mode: Normal, Repeat Track, Repeat All, Shuffle, Shuffle/Repeat
-Equalizers (only for MP3 played via libMAD)
-Audioscrobbler log
-Sleep mode (the psp will shutdown automatically at the end of a track or directory/playlist)
-Media Library: scan your ms for media and then browse them by Artist, Album, Genre or make your search.


CONTROLS
--------

General:
L = Previous function
R = Next function
L + R = Show help


File Browser:
CROSS = Enter directory/play file
SQUARE = Play directory
CIRCLE = Go up one level
START = Add directory/file to current playlist
SELECT = Toggle USB mode


Playlist Browser:
CROSS = Play selected playlist
SQUARE = Load selected playlist
CIRCLE = Remove selected playlist
START = Add selected playlist to current one


Playlist Editor:
CROSS = Move selected track down
SQUARE = Move selected track up
CIRCLE = Remove selected track from playlist
TRIANGLE= To check files (removes dead links)
NOTE = Play playlist
START = Save playlist
SELECT = Clear playlist


Media Library:
CROSS = Enter selection (genre/artist...)
CIRCLE = Exit selection
SQUARE = Play selection
START = Add selection to current playlist
TRIANGLE= Sort tracks


Player:
CROSS = Pause/Resume
CIRLCE = Stop
R = Next track
L = Previous track
TRIANGLE = Change sleep mode
START = Toggle economy mode
SELECT = Change play mode
DPAD UP = Raise volume boost
DPAD DOWN = Lower volume boost
ANALOG UP = Raise CPU clock
ANALOG DOWN = Lower CPU clock
NOTE = Change equalizer (if supported)
CROSS + DPAD UP = Raise track rating
CROSS + DPAD DOWN = Lower track rating

Instalare:
Copiati folder-ul obtinut dupa deazarhivare ms0:/PSP/GAME3xx, ms0:/PSP/GAME4XX sau ms0:/PSP/GAME5XX, in functie de versiunea de cfw.

ULTIMA ACTUALIZARE : 18.09.2009 >>>>>RC4
DOWNLOAD: http://www.girlshare.ro/793769.9

Pentru mai multe detalii cititi fisierul README.txt

Credite: psp-fanatik, ©teh_1, mtk

Custom firmware pe PSP 300x

0 comentarii
Custom firmware pe PSP 300x
« on: June 06, 2009, 10:49:36 AM »

* Reply with quoteQuote

a aparut custom firmware si pt psp 3000 :D .francezii de la pspgen au descoperit cum sa bage custom firmware pe psp 3000 . tot ce trebuie sa faci este sa
instalezi versiunea oficiala 5.03
pornesti Chickhen R2
01. Conecteaza pspul la calculator.
02. Unzip 5.03GEN-A_for_HEN.zip pe destktop de exemplu.
03. Porneste LAUNCH-ME.exe
04. La sectiunea PSP MODEL selecteaza psp pe care il detii
05. La sectiunea Mode : selecteaaza FULL
06. Apasati pe YES la PSP INSTALL
07. Apasati START
08. Fisierele sunt copiate pe PSP
09. Deconecteaza PSP din usb
10. Porneste EBOOT.PBP loaderul folosind ChickHEN R2 (doar r2 !!!nu r1)
11. Cand aplicatia porneste apasa L sau R pt a flashui firmwareul in flashul pspului. TREBUIE SA FACI ASTA DOAR O DATA
12.Apasati () pt a restarta in custom firmware.

PS din cate am inteles acest Custom firmware este si pt psp 2004. practic cu acest CFW toate pspurile sunt rezolvate ;) spor la jucat

pt mai multe detalii http://pspslimhacks.com/503gen-a-custom-firmware-released/
si uitati si un filmuletz
PSP-3000 Running 5.03 GEN-A Custom Firmware.

5.03 Gen B pentru chickHEN stabil

0 comentarii

5.03 Gen B pentru chickHEN stabil

Tue, Nov 17, 2009

Downloads, Homebrew, Tutoriale, Ştiri

Nu stiu cati dintre voi ati auzit dar acum ceva timp s-au lansat doua chestii interesante: un nou firmware pentru modelele noi de PSP 2000 si pentru PSP 3000 si o aplicatie ce permite instalarea permanenta CFW. Adica nu va trebui sa stati cu griji ca vi se termina bateria si trebuie iar instalat firmwareul.

Ce e atat de special la firmwareul asta? Pai in primul rand puteti juca absolut toate jocurile pentru PSP fara a mai fi nevoie sa le decriptati.

FIRMWAREUL

APLICATIA

Acum.. sa va explic cum sta treaba. Facem un mic tutorial.

In cazul in care nu aveti chichHEN instalat gasiti tot aici un tutorial cum sa procedati.

Pentru a instala GenB aveti nevoie de GenA. Il aveti? Nu? Pai il downloadati de AICI. Pagina am tradus-o cu Google din franceza. Daca va descurcati mai bine in franceza va puteti uita pe pagina originala.

Buun.. Presupunem ca aveti instalat HEN si peste GEN A.

Dupa ce downloadati firmwareul:

-dezarhivati fisierele

-copiati folderul “PSP” pe card in root(adica direct pe card, in niciun alt folder)

-scoateti USB-ul si, daca aveti, discul UMD

-va duceti la Games, memory stick si gasiti o “chestiune” numita update

-rulati aplicatia respectiva si urmatii pasii de pe ecran

Acum aveti 5.03 GEN B instalat. Urmeaza sa instalam aplicatia.

-downloadati si dezarhivati

-folderul seeplugins il copiati pe card in root

-dupa ce ati copiat, cautati in folderul seeplungins de pe psp urmatoarele fisier: vsh.txt si game.txt (daca nu le gasiti le puteti crea voi cu notepad)

-in fisierele acelea adaugati linia urmatoare fara ghilimele: “ms0:/seplugins/Sedna.prx”

-salvati modificarile si gata.

Download 5.03 Gen-B for ChickHEN

How to back up a PSP Game to ISO format?

0 comentarii

First you will need a PSP with M33 Custom firmware. Don’t have custom firmware? Please read this thread in order to get Custom Firmware -> 2009 Tutorial to Installing Custom Firmware 5.00 M33 on your PSP.

Firstly insert your UMD disk you want to back up to an ISO in your UMD drive of your PSP. Turn on your PSP (if not on) Now hit select or home button to bring up your M33 VSH Menu and select the following:

  • USB DEVICE: UMD Disc
  • UMD ISO MODE: Normal
Making a PSP UMD back up (select the following in the M33 VSH Menu)

Making a PSP UMD back up (select the following in the M33 VSH Menu)

Once you have selected the M33 VSH menu as above, exit the VSH menu. In your PSP Menu – Go to settings USB Mode. Now connect a USB cable to your PSP and connect this to your PC (sorry macs are not supported)

Depending on your PSP it will say “Installing drivers” this is normal under vista. Go your computer and you should now see a Drive logo with the ID of the UMD. In my case for GTA Vice City Stories its ULES-00502. Open this and you will see some thing like ULES-00502.iso. This is your ISO back image of your UMD Disk. Copy this to your computer. I recommend you rename this iso to the games name for easy of use.

PSP UMD Drive shown here

PSP UMD Drive shown here. Open the drive and we will have our PSP .iso image inside

You can now make this into a Compressed image file (CSO) or just run that .iso file in your ISO folder of your PSP memory stick to run that game of the memory card. With out UMD lag!!!! Yeah!

5.03 GEN-A Custom Firmware released! CFW on PSP-3000’s

0 comentarii

5.03 GEN-A Custom Firmware released! CFW on PSP-3000’s




PSPGEN have released Custom Firmware 5.03GEN-A for HEN!! What does this mean? Well its something many of us have been waiting for since the PSP-3000 was released. Full blown Custom Firmware is now possible on your PSP-3000 / PSP-2000 TA088v3. Thanks to and PSPGen.com. Just watch the video above as proof this works.

How to Install,

Pre installation: Make sure you have a PSP-3000 or PSP-2000 with Firmware 5.03 – You need this for ChickHEN R2 to work.

  1. Download ChickHEN R2 by Davee & Team Typhoon
  2. Download 5.03 GEN-A Custom Firmware.
  3. Install ChickHEN and run/load ChickHEN R2
  4. Follow these steps below

01. Connect your PSP to the computer in USB Mode when you have loaded ChickHEN R2.
02. Unzip 5.03GEN-A_for_HEN.zip on your desktop by example
03. double-click on LAUNCH-ME.exe (GUI)
04.PSP Model : choose options PSP-2000 or PSP-3000 (depends of your PSP)
05.Mode : Choose option FULL
06. PSP Install : Choose option YES
07. Push START.
08.the files are copied on your PSP.
09. Disconnect the PSP from USB.
10. Launch the main EBOOT.PBP / Loader using ChickHEN R2 (only R2! NOT R1!).
11. When the app load, press L or R to flash the firmware in your flash. YOU ONLY NEED MAKE IT ONE TIME!
12. Press () to reboot in the custom firmware.

Having trouble running ChickHEN R2? Please see this guide.

Features:

# COMPATIBILITY PSP-3000 and PSP-2000 v3
o Reading of plays PS1
o Reading of the backups of plays PSP
o GEN VSH FINELY available
o Recovery in VSH available (some bugs remains to be regulated – to see further)
o Access to the PSN

Known Bugs:

The RECOVERY MODE of the 5.02GEN-A was patché to turn on the PSP-3000. It makes it possible to modify the majority of the usual options. Note that we some problems with this recovery in VSH and will undoubtedly have to be awaited a patch encounters correction so that it is functional at 100%. Note that SMALL GEN VSH functions, him, very well.

Here menus and their equivalents:

* Togle USB = OK
* configuration ok
o Sony skip: do not go (useless thus not engraves)
o Hide corrupt let us icons = walk not and activeSkip Sony logo
o range folder HB ok
o autorun EBOOT ok
o fake area ok
o use vsh finely ok
o XMB USB Device ok
o Charge device with usb ok
o Use M33 network update ok
o use version TXT ok
o hide MAC ok

* use range ok categories
* Reboot in official firmware > nonfunctional
* Run program At = Finely advanced
* advanced = CPU SPEED
* CPU SPEED = Plugins
* plugins = registry hack
* registry hack = suspends device
* device = reboot in official firmware suspends
* Reset system = quit

Put besides that all functions and we will try to correct this as fast as possible.

Depistarea cardurilor "FAKE"

0 comentarii
Cum putem deosebi un card Sony fake de un card Sony original?
În ciuda faptului că cele fake sunt foarte ieftine , acestea sunt şi foarte proaste. Scrie pe ele că sunt Sony - dar nu sunt.Scrie pe ele că suportă MagicGate - dar nu suportă. Scrie pe ele că au 2GB dar dacă încercaţi să scrieţi pe el date nu încape mai mult de 1GB-1.5GB. În plus, vitezele de scriere a datelor pe card sunt foarte mici.

Dacă doriţi să cumpăraţi un card , vă sfătuiesc să luaţi unul original.

Cum putem depista un card FAKE chiar dacă pe el scrie Sony şi MagicGate.

1.Dacă putem să-l problam , îl inserăm în PSP , selectăm orice categorie , selectăm Memory Stick şi apăsăm triunghi. Apare un meniu, din care selectăm Information. Ne uităm la MagicGate. Dacă scrie Suported înseamnă că acel card este original. Dacă scrie altă aberaţie de genu Unknown, Unsuported sau nu scrie nimic, acel card este unul FAKE şi nu trebuie cumpărat.

2.În cazul în care nu putem să probăm cardul , ne uităm pe ambajal.

a)Ne uităm în josul cartonului din ambalaj. Scrie o serie.
-Seria unui card ORIGINAL Sony este de tipul : MSX-MxGS/X unde x reprezintă numărul de GB ai cardului.Exemplu: pentru unul de 2GB , seria va fi asta : MSX-M2GS/X
-Seria unui card FAKE Sony este de tipul : MSX-MxGST/X unde x reprezintă numărul de GB ai cardului.De asemenea apare şi un T un plus.

b)Ne uităm în susul cartonului, lângă titlu unde vedem un fel de sigilliu (o hologramă).
-Holograma originală Sony este de culoare AURIE (un galben asemănător cu cel al aurului)
-Holograma FAKE "Sony" este de culoare VERDE-GALBEN (este complet diferită de cea AURIE)

c)Ne uităm tot în josul cartonului , unde ne este indicat spaţiul cardului (în GB).Vedem un cerc colorat , şi în interiorul său capacitatea.
Culorile unui card ORIGINAL : - pentru 1Gb culoarea este un BLEU (albastru deschis)
- pentru 2Gb culoarea este un VERDE DESCHIS
- pentru 4Gb culoarea este un BLEUMARIN (un albastru mai închis)
- pentru 8Gb culoarea este un ROŞU
Culorile unui card FAKE sunt total diferite faţă de aceste culori.

3.În cazul în care putem să desfacem cardul ne uităm pe spatele cardului (pe partea cu pinii de contact) unde sunt scrise nişte rânduri. Ne uităm la rândul care începe cu MX.
-Seria corectă a unui cârd ORIGINAL este : MSX-MxGS unde x reprezintă numărul de GB ai cardului, iar după cum putem vedea literele S sunt italice (înclinate).
-Seria unui card FAKE este total diferită de cea originală: MSX-MxGST unde x reprezintă numărul de GB ai cardului. După cum vedem, S-urile nu sunt înclinate şi apare şi acel T în plus.

4.Alte indicii :
-Cardul original nu are nici un sticker pe partea cu pinii , dar la cel FAKE putem găsi aptibilduri lipite pe spate.
-Cardul ORIGINAL este fabricat în Japonia (scrie pe partea cu pinii) , iar cel FAKE poate fi fabricat în China , Taiwan sau alte ţări cunoscute ca făcând obiecte FAKE.

Atenţie : verificaţi toate criteriile când cumpăraţi un card deoarece se pot combina între ele (ex : să aibă hologramă originală şi să aibă seria greşită)

Sper să va ajute şi să nu cumpăraţi FAKE-uri.
Baftă , cristi_mic!

Update : am revenit cu nişte poze , cred că vă pot ajuta :


Card Fake - 4GB
Serie : MSX-M4GST/X - serie de fake



Card Original - 8GB
Serie : MSX-M8GS/X - serie corectă pentru un card de 8GB original
De asemenea şi culoarea în care este capacitatea este corectă - roşu.



Card original - 2GB - Noua tehnologie MARK2 care momentan nu se copiază

Seriile unui card original cu MARK2 :
MS-MTxG - unde X reprezintă nr. de GB ai cardului (ex : card de 2 GB , serie : MS-MT2G)

ATENŢIE MARE CÂND CUMPĂRAŢI CARDURI DE PE SITE-URI GEN OKAZII.RO SAU ANUNŢURI PUBLICITARE!


Autorul original este : Cristi_mic

[Ghid] Totul despre placa ta de baza

0 comentarii
PSP-1000:


Placa de bază: TA-079 V1

Informaţii: Găsită în prima lansare a PSP-urilor. Livrată cu versiunea 1.00.
Informaţii tehnice: Tachyon: 0x00140000, Baryon: 0x00306000, Pommel: 0x00000103
Merge instalat custom firmware? Desigur, acesta este PSP-ul cu versiunea 1.00 pe care se poate instala custom firmware. Dacă se face update la versiunea 1.51 sau mai mare, custom firmware-ul nu mai poate fi instalat decât prin metodă pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 1.00




Placa de bază: TA-079 V2

Informaţii: Găsită în PSP-urile lansate. Livrată cu versiunea 1.00/1.50.
Informaţii tehnice: Tachyon: 0x00200000, Baryon: 0x00306000, Pommel: 0x00000103
Merge instalat custom firmware? Da, toate PSP-urile cu placa de bază TA-079 pot cel puţin să fie updatate la versiunea 1.51 sau mai mare. Peste versiunea 3.40, se poate folosii un downgrader. După aceea, trebuie folosită metoda pandora. (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 1.00




Placa de bază: TA-079 V3

Informaţii: Găsită în PSP-urile lansate. Livrată cu versiunile 1.00/1.50/1.51/1.52/2.00.
Informaţii tehnice: Tachyon: 0x00200000, Baryon: 0x00040600, Pommel: 0x00000103
Merge instalat cusom firmware? Da, toate PSP-urile cu placa de bază TA-079 pot cel puţin să fie updatate la versiunea 1.51 sau mai mare. Peste versiunea 3.40, se poate folosii un downgrader. După aceea, trebuie folosită metoda pandora. (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 1.00




Placa de bază: TA-081

Informaţii: Această a apărut mult mai târziu după lansarea primelor modele. Poate rula versiunea 1.50 ca şi modelele precedente. În principiu a fost livrată cu versiunea 2.00 sau mai mare.
Informaţii tehnice: Tachyon: 0x00300000, Baryon: 0x00040600, Pommel: 0x00000103
Merge instalt custom firmware? Da se pot instala, cu ajutorul unui downgrader se va ajunge la versiunea 3.50 sau mai mică. O data downgradat, se poate face update la custom firmware. Cealaltă variantă de a ajunge la un custom firmware este cu ajutorul bateriei pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 1.00




Placa de bază: TA-082

Informaţii: Aceasta are ClockGen schimbat în hardare. Datorită acestui fapt, modelele TA-082 se stricau (brick) dacă erau downgradate la versiunea 1.50. Schimbarea codului plăcii de bază TA-082, 0x05, în idstirage-ul său, vă va permite butarea versiunii 1.50. Cu ajutorul bateriei pandora, toate schimbările funcţionează corect, deci puteţi downgrada PSP-ul în siguranţă la versiunea 1.50. Aceste modele a fost livrate cu versiunea 2.60. Mai apoi au fost livrate cu versiuniile 2.71 şi 2.80.
Informaţii tehnice: Tachyon: 0x00400000, Baryon: 0x00114000, Pommel: 0x00000112
Merge instalat custom firmware? Da, în momentul în care a fost făcut downgrade la versiunea 1.50, se pot rula custom firmware. Altă metodă fiind cu ajutorul bateriei pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 2.60.




Placa de bază: TA-086

Informaţii: Această placă de bază are tot ce are şi modelul TA-082. Diferenţă între aceste modele este că această (TA-086) are posibilitatea de a schimba LCD-ul. Sony a adăugat noi module LCD la acest model. Această a fost ultima placă de bază scoasă de Sony înaintea lansării PSP-ului 2000. PSP-urile cu placă de bază TA-086 au fost iniţial livrate cu versiuniile 2.81/2.71 (neconfirmat) iar mai târziu fiind lansată cu versiunea 3.51.
Informaţii tehnice: Tachyon: 0x00400000, Baryon: 0x00121000, Pommel: 0x00000112
Merge instalat custom firmware? Da, după ce a fost downgradat PSP-ul la versiunea 1.50 folosind oricare metodă posibilă, acest PSP poate să ruleze custom firmware. Poate avea custom firmware instalat şi prin metoda bateriei pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 2.60.




PSP-2000:

Placa de bază: TA-085

Informaţii: A fost găsită în primele modele de PSP slim. A fost livrată cu versiunea 3.60. Nu a putut fi downgradată la versiunea 1.50 deoarece aceasta ar fi cauzat un brick şi partea hardware al acestei plăcii a fost făcută special pentru versiuniile târzii. Idstorege-ul acestei plăci, a fost diferit faţă de cel de la PSP-1000, această versiune a fost criptată.
Informaţii tehnice: Tachyon: 0x00500000, Baryon: 0x0022B200, Pommel: 0x00000123
Merge instalat custom firmware? Da, dar poate avea custom firmware doar prin metoda bateriei pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”). Prin această metodă se poate instală orice firmware, incluzând custom firmware-urile.
Se pot face baterii pandora cu această placă de bază? Da, desigur.
Care este cea mai mică versiune pe care o poate rula? Versiunea 3.60.




Placa de bază: TA-085 V2

Informaţii: Această placă de bază este aproape indentică cu modelul precedent (TA-085), dar aceasta nu permite crearea bateriilor pandora (funcţia de scriere a EEPROM-ului bateriei a fost scoasă). Acest tip de PSP a fost livrat cu versiunea 3.72, apoi cu versiunea 3.73 şi în final cu versiunea 3.80.
Informaţii tehnice: Tachyon: 0x00500000, Baryon: 0x00234000, Pommel: 0x00000123
Merge instalat custom firmware? Da, dar instalarea se poate face doar prin metoda bateriei pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Nu, funcţiile de scriere a bateriei au fost scoase la această placă de bază, la fel şi la modelele următoare.
Care este cea mai mică versiune pe care o poate rula? Versiunea 3.60.




Placă de bază: TA-088 V1

Informaţii: Acest model aduce cu el câteva noutăţi. Are proiectat o protecţie mult mai bună pentru părţile vitale hardware. Această protecţie a fost iniţial destinată modelului TA-088 V3. PSP-urile cu placa de bază TA-088 V1 au fost livrate cu versiunea 3.71, apoi cu versiunea 3.80, apoi 3.90 şi în final versiunea 3.95.
Informaţii tehnice: Tachyon: 0x00500000, Baryon: 0x00243000, Pommel: 0x00000123
Merge instalat custom firmware? Da, dar acest lucru merge doar dacă folosiţi metoda pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Nu.
Care este cea mai mică versiune pe care o poate rula? Versiunea 3.60.




Placa de bază: TA-088 V2

Informaţii: Această placă de bază a fost o surpriză din partea Sony. Ea nu putea să buteze aplicaţia bateriei pandora, Despertar del Cementerio (Unbricker-ul universal) care foloseşte 1.50 + 3.40 kernel. Despertar del Cementerio v1-v5 folosea 1.50 + 3.40 kernel. PSP-urile mai vechiu puteau să ruleze 1.50 dar cu modulele hardware ale versiunii 3.40. Această placă de bază foloseşte un CPU nou creat pentru firmware-urile mai mari, deci chiar şi versiunea 1.50 cu modulele versiunii 3.40 nu puteau fi încărcate. Dar subestimatul Dark_Alex a lansat Despertar del Cementerio V6 care, desigur, a reuşit instalarea custom firmware-ului pe PSP-urile cu această placă de bază. PSP-urile cu această placă de bază au fost livrate în magazine cu versiunile 3.90 sau versiunea 3.95.
Informaţii tehnice: Tachyon: 0x00500000, Baryon: 0x00243000, Pommel: 0x00000123
Merge instalat custom firmware pe această placă de bază? Da, dar poate fi instalat doar cu ajutorul bateriei pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”).
Se pot face baterii pandora cu această placă de bază? Nu.
Care este cea mai mică versiune pe care o poate rula? Versiunea 3.60.




Placa de bază: TA-088 V3

Informaţii: Cunoscută că şi „PSP-ul anti-hack”. Este livrat în magazine cu versiunile 4.00/4.01/4.05. Nu permite butarea bateriei pandora. De altfel foloseşte un nou CPU şi un nou model de placă de bază (că şi format).
Merge instalat custom firmware? Nu.
Se pot face baterii pandora cu această versiune? Nu.
Care este cea mai mică versiune pe care o poate rula? Versiunea 4.00.




Placă de bază: TA-090 V1

Informaţii: Această placă de bază a fost găsită pe PSP-urile reparate. Oamenii au început să găsească această placă de bază în momentul în care au primit PSP-urile 2000 trimise la Sony pentru reparaţii. Versiunea cu care au venit înapoi a fost probabil versiunea 4.05. Sunt cunoscute puţine lucruri despre versiunea ei. Sony a updatat PSP-urile reparate la ultima versiune.
Merge instalat custom firmware? Da, este aproape identică cu TA-088 V2, deci poate să ruleze custom firmware prin metoda pandora (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Pandora+MMS”). La fel ca şi TA-088 V2, nu poate să buteze Despertar del Cementerio V5 sau mai mică.
Se pot face baterii pandora cu aceste PSP-uri? Nu.
Care este cea mai mică versiune pe care o poate rula? Versiunea 3.60.




PSP-3000


Placa de bază: TA-090 V2

Informaţii: Această placă de bază a fost găsită în magazine o data cu lansarea PSP-urilor 3000. Această placă de bază are un nou format la fel ca şi TA-088 V3, şi este modificată hardware astfel încât metoda pandora să dea greş. Noua formă a fost mişcarea organizată de Sony contra celor care îşi modau PSP-ul hard mod. De asemenea această placă de bază avea şi un nou IC (Internal Control) microchip care nu permitea modarea PSP-ului hard/soft-mod. Deoarece opreşte butarea bateriilor pandora şi de asemenea nu se poate încărca MagicStick IPL (Iniţial Program Loader); această placă de bază este în momentul de faţă cea mai securizată. Legat de versiunea cu care această a fost livrată, este vorba de versiunea 4.20 sau 4.31 în funcţie de regiune.
Merge instalat custom firmware? Da. (Vezi tutorialul de pe site www.psp-fanatik.ro -> Tutoriale -> „Modare PSP 3000/2000/1000 via HEN”).
Se pot face baterii pandora cu aceste PSP-uri? Nu.
Care este cea mai mică versiune pe care o poate rula? Versiunea 4.20.


Câteva informaţii în plus:

Pentru a determina placa dvs. de bază folosiţi următorul homebrew: PSPident 0.4

Daxter Silver PSP Slim (Plăci de bază: TA-085, TA-085 V2, TA-088 V1, TA-088 V2)
Star Wars White PSP Slim (Plăci de bază: TA-085, TA-085 V2, TA-088 V1)
God-of War Red PSP Slim (Plăci de bază: TA-085 V2, TA-088 V1, TA-088 V2)

* Tachyon - Posibil să reprezinte versiunea cipului care conţine CPU-ul, ME-ul şi GPU-ul.
* Baryon - Numărul versiuni SCC (System Control chip) al PSP-ului.
* Pommel - GPIO al PSP-ului, care controlează un sistem care în caz de o izbitură (Crash) stinge PSP-ul
* Kirk - Cipul principal al PSP-ului pentru decriptat/verificat.
* Spock - Cipul secundar al PSP-ului pentru decriptat, este folosit doar pentru a decripta informaţii de pe UMD-uri.


Credite:
erland pentru informaţii despre tachyon + baryon + pommel
PSP-Fanatik pentru postare în limba română!
© PSP-Fanatik.ro

PMPlayer Advance v3.0.6 – PSP PMP Player

1 comentarii

PMPlayer Advance (PPA)

PMPlayer Advance(PPA) is a media player for PSP.



Changelog v3.0.5 (20090709):
- added CFW 5.50GEN-B, PSP1000 Supported
- fixed MP4 (MKV) file delete function


Supported File Format:

PMP Format V2 ( *.pmp ):
o Video:
AVC, main profile, level 2.1, <=480*272 MPEG-4 Part2, <=480*272 o Audio: MP3 AAC MP4 Format ( *.mp4 ):
o Video:
AVC, baseline profile, level 1.3, <=480*272 AVC, main profile, level 2.1 or 3.0, <=720*480 MPEG-4 Part2, <=480*272 o Audio: AAC MKV Format ( *.mkv ):
o Video:
AVC, baseline profile, level 1.3, <=480*272 AVC, main profile, level 2.1 or 3.0, <=720*480 o Audio: AAC

Download:

[Mirror1]

[Mirror2]

[Mirror3]


How to INSTALL?

Copy PPA3xx in X:/PSP/GAME/


[ Control ]

    browse view:

    LTRIGGER + UP : select top entry
    LTRIGGER + DOWN : select bottom entry
    LTRIGGER + SQUARE : turn on/off movie information preview
    LTRIGGER + SELECT : open skin select dialog
    LTRIGGER + TRIANGLE : open version dialog
    LTRIGGER + START : open quit dialog
    TRIANGLE : open help dialog
    SQUARE : open configuration view
    SELECT : if current selected entry is a movie file, open delete dialog
    START : go to the root directory
    UP : select last entry
    DOWN : select next entry
    CIRCLE : if current selected entry is a directory, enter this directory; if current selected entry is a movie file, play it
    CROSS : if current selected entry is a movie file, resume play it

    playing movie:

    TRIANGLE : play stop
    SQUARE : play pause/resume
    CIRCLE : if playing, turn on/off status bar; if pause, capture current video picture, save in ms0:/PICTURE/PPA directory
    RIGHT : forward
    LEFT : backward
    SELECT : select next audio stream
    UP : amplify(+)
    DOWN : amplify(-)
    RTRIGGER : luminosity boost(+)
    LTRIGGER : luminosity boost(-)
    START : select next aspect ratio
    CROSS + RIGHT : fast forward
    CROSS + LEFT : fast backward
    CROSS + RTRIGGER : turn on/off play loop
    CROSS + LTRIGGER : select next subtitle
    CROSS + SQUARE : select next subtitle font color
    CROSS + CIRCLE : select next subtitle font border color
    CROSS + SELECT : select stereo, left, right
    CROSS + START : select display normal or inversion on PSP LCD

[ Supported File Format ]

    PMP Format V2( *.pmp ):

    • Video:
      AVC, main profile, level 2.1, <=480*272 MPEG-4 Part2, <=480*272

    • Audio:
      MP3
      AAC

    MP4 Format( *.mp4 ):

    • Video:
      AVC, baseline profile, level 1.3, <=480*272 AVC, main profile, level 2.1 or 3.0, <=720*480 MPEG-4 Part2, <=480*272

    • Audio:
      AAC

    MKV Format( *.mkv ):

    • Video:
      AVC, baseline profile, level 1.3, <=480*272 AVC, main profile, level 2.1 or 3.0, <=720*480

    • Audio:
      AAC

[ Multilingual ]

    PPA is a Multilingual Homebrew.
    PPA use miniconv.prx to convert between UTF-8 and your local codepage.
    there are two miniconv.prx version, one is CJK, another is EUR.

    • CJK miniconv.prx supported : GBK, BIG5, SHIFT-JIS, EUC-KR
    • EUR miniconv.prx supported : MS-EE, MS-CYRL, MS-ARAB, ISO-8859-1, ISO-8859-2, ISO-8859-6, ISO-8859-9

    download applicable miniconv.prx version, and replace the normal miniconv.prx in PPA3xx directory.

[ Subtitle ]

    PPA support srt subtitle and microdvd subtitle.
    subtitle file must be in the same directory with movie file, and have a same base filename, example "xxx.pmp, xxx.srt"

    set subtitle charset:

    1. in PPA browse view, press "SQUARE" to open configuration view
      subtitle1
    2. select "Subtitles charset", press "CIRCLE" to make it editable
    3. use "LEFT", "RIGHT" to select codepage to suit your subtitle
    4. press "CIRCLE" to save or press "CROSS" to cancel
    5. press "TRIANGLE" to close configuration view

    set subtitle font file:

    1. copy your font file to PPA font directory( PPA3xx/fonts )
    2. open "config.xml" with a text editor
    3. set "config/subtitles/font/face" property value as your subtitle font filename, example 'face="subfont.ttf"'
    4. save config.xml

[ USBHost ]

    use usbhost, PPA can play your movie files in your PC, do not need to copy them to PSP's ms.

    1. run usbhostfs on your PC
    2. connect PSP to PC with USB cable
    3. run PPA on PSP
    4. in PPA browse view, press "SQUARE" to open configuration view
      usbhost1
    5. select "USB Host", press "CIRCLE" to make it editable
    6. use "LEFT", "RIGHT" to turn "ON/OFF"
    7. press "CIRCLE" to save or press "CROSS" to cancel
    8. press "TRIANGLE" to close configuration view
    9. press "START" to make browse go to the root
      usbhost2
    10. select "", press "CIRCLE" to enter this dirctory
    11. browse your movie files, and play them

    btw, to display correct filename, you shall also set "FileSystem Charset" to your local codepage

      filesystem1

[ NetHost ]

    use nethost, PPA can play your movie files in your PC, do not need to copy them to PSP's ms.

    1. run nethostfs on your PC
    2. create a new "INFRASTUCTURE MOD" network entry on your PSP, PPA will use it to connect nethostfs
    3. run PPA on PSP
    4. in PPA browse view, press "SQUARE" to open configuration view
      nethost1
    5. select "Net Entry", press "CIRCLE" to make it editable
    6. use "LEFT", "RIGHT" to select the network entry you had created
    7. press "CIRCLE" to save or press "CROSS" to cancel
    8. select "Net address", press "CIRCLE" to make it editable
    9. use "LEFT", "RIGHT", "UP", "DOWN" to enter your PC ip address
    10. press "CIRCLE" to save or press "CROSS" to cancel
    11. select "Net port", press "CIRCLE" to make it editable
    12. use "LEFT", "RIGHT", "UP", "DOWN" to enter nethostfs listen port, default is "7513"
    13. press "CIRCLE" to save or press "CROSS" to cancel
    14. select "Net Host", press "CIRCLE" to make it editable
    15. use "LEFT", "RIGHT" to turn "ON/OFF"
    16. press "CIRCLE" to save or press "CROSS" to cancel
    17. press "TRIANGLE" to close configuration view
    18. press "START" to make browse go to the root
      nethost2
    19. select "", press "CIRCLE" to enter this dirctory
    20. browse your movie files, and play them

    btw, to display correct filename, you shall also set "FileSystem Charset" to your local codepage

      filesystem1

[ TVOut ]

    Requirement : PSP200X(slim) + OFW 3.71 or later

    1. connect PSP to TV with PSP TV adaptor cable.
    2. run PPA on PSP
    3. in PPA browse view, press "SQUARE" to open configuration view
      tvout1
    4. select "TV AspectRatio", press "CIRCLE" to make it editable
    5. use "LEFT" , "RIGHT" to select your TV aspectration, 16:9 or 4:3
    6. press "CIRCLE" to save or press "CROSS" to cancel
    7. select "Video Mode", press "CIRCLE" to make it editable
    8. use "LEFT" , "RIGHT" to select the video mode to suit your cable

      "PSP LCD" : not tv out
      "Composite" : AV cable or S-Video cable
      "Component Interlace : Component Interlace cable
      "Component Progressive" : Component Progressive cable

    9. press "CIRCLE" to save or press "CROSS" to cancel
    10. PPA will output the video on your TV set

    Howto process TV overscan

    1. make PPA TVOut
    2. in PPA browse view, press "SQUARE" to open configuration view
    3. select "TV AspectRatio", press "CIRCLE" to make it editable
    4. use "LEFT" , "RIGHT" to select aspectration to "16:9"
    5. press "CIRCLE" to save
    6. select "TV OverScan(L.T.R.B)", press "CIRCLE" to make it editable
    7. use "LEFT", "RIGHT", "UP", "DOWN" to enter four overscan value(left, top, right, bottom)
    8. press "CIRCLE" to save
    9. if PPA browse view not just fill your TV set, continue step 6
    10. select "TV AspectRatio", press "CIRCLE" to make it editable
    11. use "LEFT" , "RIGHT" to select aspectration to suit your TV set
    12. press "CIRCLE" to save